Don't get me wrong it looks fantastic, the first 7 or so steps are easy, take apart drill 4 holes and put back together.... littrally plug in and play its strange how pretty much all the fixings are there.... But unless your strech arm strong to cut the pipe and join it with everything else still attached is effort....

i've given up now, taped the ends of the cooler up and tucked them safely out the way and i'm going to extend the pipes as you would of done if using the mondeo cooler and join into the pas return pipe there.

essentially mountune provide you with some fancy clips and a cooler, the crimped ends are nice as it reduces chances of leaking...

however those pipes are far too short for me to also confidently cut the pipe they tell you too and then manage to join it on.


I have no idea if Dan_the_man will be doing his this weekend as i would like to see how he gets on...

but without dropping the subframe, a suspension component or removing the engine it's just not worth it there. especially if its a place that could potentially house a leak.

i have an idea on routing the pipes up and over a bit better and which way to go as i've looked at all possible options

its just lucky i don't have to drop all my PAS fluid again otherwise i would of been pissed!