Quote:

---

It is the easiest thing to change. I got my gaitor from Ford, exactly the same as the one on the TeamTorquesteer site but cost about £9.

---

Agree with Gareth..

1/ Before you start though you will need 1 zip strap/tie strap of about 2mm wide,and a pair of snips to cut them.

2/ Get a spoon and simply pry the bottom of the original gaitor away from the consol. 'The round plastic bit at the bottom of the rubber gaitor'.

3/ Then, unscrew the gearknob, (put your hand under the whole thing when unscrewing so that you dont scratch the consul). After a while it will all come off. Remove the silver ring from the bottom of the gaitor.

4/ Now turn it inside out and you will see a zip tie around the neck of the gearknob. Snip this off. (And throw the original gaitor as far as possible).

5/ Slip the new gaitor in place, inside out, and with your new zip tie, strap it around the neck of your gearknob, (there is a recess for it). Then just reverse the process.

I know it sounds a lot, but as Gareth said, it is so easy. All that's needed is a bit of comon sence.