Registered: 04/06/10
Posts: 4733
Loc: Chatham, Kent
It was anything but mad skills more like bodge to the extreme and then some haha! If yours don't fit just bust out the file if you have one it stays in fine with just one pin and works just the same
_________________________
Colorado Red 07 Plate ST
Mountune CAIS - 60mm Throttle Body - Full Resonated Milltek System - Bilstein B12's - 300mm front discs - Gloss Black Team Dynamics Pro Race 3's - Tints - Red-Black DMB Badges and loads of eBay stuff...
Registered: 25/05/10
Posts: 8576
Loc: Birmingham, England
just double checked... the fronts are opposite pin but the rears are definitely offset pin Will just keep the ones I bought as spares and get a set of offset ones for the rear indicators
Registered: 04/06/10
Posts: 4733
Loc: Chatham, Kent
That's weird because mine are both definitely opposite! It is a fiesta at the end of the day though can't expect every one to be built the same!
_________________________
Colorado Red 07 Plate ST
Mountune CAIS - 60mm Throttle Body - Full Resonated Milltek System - Bilstein B12's - 300mm front discs - Gloss Black Team Dynamics Pro Race 3's - Tints - Red-Black DMB Badges and loads of eBay stuff...
I still haven't de-tangoed mine, bulbs have been sat in my draw waiting since I posted this! Just haven't really had a day when I'm not busy, and the weather has been half decent!
Need to get some for the rear too at some point but will check if they're offset or opposite first!
_________________________
06 Performance Blue ST; mud flaps, boot lock cover, detangoed, Mountune CAIS, Milltek full system (to be fitted)
Registered: 04/06/10
Posts: 4733
Loc: Chatham, Kent
Just buy some and have your metal file on hand so If they're the wrong ones you can make them fit.
_________________________
Colorado Red 07 Plate ST
Mountune CAIS - 60mm Throttle Body - Full Resonated Milltek System - Bilstein B12's - 300mm front discs - Gloss Black Team Dynamics Pro Race 3's - Tints - Red-Black DMB Badges and loads of eBay stuff...