As above cant find full details on this anywhere i really want to buy a but want one with heated seats and all the ones in my price range + local are not

any help would be great

thanks in advance Matthew

Take old seats out and put new heated ones in. Simple as that really mate. Then just reconnect the wiring loom connector back up to the seats and your done.

The wiring should be there already so the seat is a straight swap as suggested. I don't know where the button to the heated seats lies though?

so the heat part would work without putting a fuse in the fusebox for them? and the button is on the seats

the fuse is probably already there but that's an easy check. remove the glove box and on the back there's the legend for the fuse box. Check which position it should be in and if it's not there simply plug in the correct fuse.

I think it's probably there because a similar thing happened when I installed the fog lights. The wiring was already there so I just had to plug in the foglights and replace the switch on the dash to support the fogs. The fuse was already there so all was plain easy. Have a look and keep us posted

It wil work. I did this on my old fez. Jus a matter of finding st leather heated seats and putting them in. Simples

brilliant thanks for that

Hasn't Watty ST or whatever his name is got some Heated Seats for sale??

HERE

im sure ive seen someone that had it but had too retro fit the wiring... just used some old amp cable and fused it and put it on a relay i think though... cant remember if it was an ST or not