Quote:

---

---

Quote:

---

which part is the retaining mechanism?

---

+1
im not sure what u mean with retaining mechanism

Quote:

---

Changing Headlight bulbs:

Tools required

Flathead screwdriver
10mm Spanner

Passenger bulb can be changed easily without any hassle

The process required to change the driver side bulb is as follows:

1. Remove the hex head screw using the 10mm spanner that is holding the engine coolant reservoir down.

2. Use the flat head screwdriver to gently prise the reservoir off the lug located at the back of the reservoir

3. Put the reservoir gently to one side making sure not to damage or disconnect any hoses

4. Remove plastic cap on the back of the headlight

5. Pell the electrical connector off the back of the bulb (Push gently onto the bulb to ease process)

6. Unclip retaining mechanism holding bulb in headlight.

7. Remove bulb making sure not to tough glass if bulbs are to be re used.

8. Replace bulbs with new.

9. To replace indicator bulbs turn plastic cap above headlight bulb and remove.

10. Change bulb

11. Refix plastic cap making sure to turn and lock into position.

12. Re assemble by following the above process in reverse

Hope this helps

Matt

---