can I get silverstar for these and assume they won't flake like the factory orange peel ones, heard there are LED version which now contain a resistor to match up with the correct voltage and shouldn't blow.

Let me know if they work as want to change my rear indicator bulbs.

am not messing with them until it fails next MOT

Ive got silvertec bulbs in mine detango for the rear

They easy to install dan?

Nath, they are very easy, all you do is open your boot and you will see the screws holding in the whole rear light unit. Undo those and the light will fall out in your hands (along with a LOT of muck that has built up behind them - top tip, give it all a good clean). You just unclip the relevant bulb then and put your new one in.

Cool, thanks Stew (another easy job which will be done)

I've put in a pair of Osram Diadems.

Well recommended.

Gotta admit those diadem bulbs do look pretty smart might have to get me some when the silvertecs fail on me

what size/volts/fitting ?

Opposite pin 382's if I remember correctly

did the pins change pre face lift v face lift, manual just says P21w doesn't say ow about opposite or off set pins

My facelift bulbs are opposite I think

everyone is saying differenttttttttttttttttttttttttt

I'm sure opposite are for the Pre-facelift. I ordered some and turned out they were wrong so had to order some more. I'll check my eBay history later and confirm but I'm sure you need offset