Ford Fiesta ST
Page 2 of 2 < 1 2
Topic Options
Rate This Topic
#467750 - 24/09/12 02:50 PM Re: remap for mil light? [Re: kinobeSTew]
Jack_P Offline
Dirtiest Car 2013 + 2014

Registered: 21/07/10
Posts: 6012
Loc: Northants
Stew are you sure it can be a straight fitting and not needing an elbowed version?
Only reason i ask is because i need one and the guy who fitted mine said get an 9deg elbow instead as it will stigk out to far and not fit.
_________________________
180Bhp/206Nm



Top
#467751 - 24/09/12 03:07 PM Re: remap for mil light? [Re: Jack_P]
kinobeSTew Offline
Site Supporter

Registered: 23/01/11
Posts: 1616
Loc: Hindley, Lancashire, England
No, i'm not sure. It's a good point Jack. I probably should have added that I don't even know if it will fit.

I just found the ones which looked the best made on ebay. From what I can gather, some people have had problems with the sensor not getting enough fumes which will cause the light also hence why I thought a 90degree one might not work. Hmm....might have to get under the car and see how much room there is unless anyone has a photo?
_________________________
<center>
Click signature to see my Lil Red ST project blog</center>

Top
#467752 - 24/09/12 04:18 PM Re: remap for mil light? [Re: kinobeSTew]
Jack_P Offline
Dirtiest Car 2013 + 2014

Registered: 21/07/10
Posts: 6012
Loc: Northants
Quote:

No, i'm not sure. It's a good point Jack. I probably should have added that I don't even know if it will fit.

I just found the ones which looked the best made on ebay. From what I can gather, some people have had problems with the sensor not getting enough fumes which will cause the light also hence why I thought a 90degree one might not work. Hmm....might have to get under the car and see how much room there is unless anyone has a photo?




Its just what the guy from work who put mine on told me. Another guy, his mrs runs a decat system which he said he has the elbown on and its never come on

Found this picture of stasons Sportcat which is same as mine, looks as if it goes out upwards and to the right ( if you're looking from the rear )atleast the elbow will send it off sideways and not into the floorpan!



Just found a photo of a decat pipe, it appears it goes straight up so i can imagine you will need an elbow instead!

_________________________
180Bhp/206Nm



Top
#467753 - 25/09/12 11:34 AM Re: remap for mil light? [Re: Jack_P]
kinobeSTew Offline
Site Supporter

Registered: 23/01/11
Posts: 1616
Loc: Hindley, Lancashire, England
The latter is me, hehe. Found any decent elbow ones? I would quite like a stainless one so it doesn't corrode and get stuck.
_________________________
<center>
Click signature to see my Lil Red ST project blog</center>

Top
#467754 - 25/09/12 05:10 PM Re: remap for mil light? [Re: kinobeSTew]
owningmilo07 Offline
Site Supporter

Registered: 29/05/10
Posts: 940
Loc: Somerset
thanks for the move kenny =]

i got it checked and the codes are
p0126
p0128

both are to do with 2nd o2 sensor
but not sure what lol
i found the descriptions on this forum yesterday but now lost them =[
_________________________
done
all aero wipers
dmb badges
lenso d1r's matt black
eibach 35mm springs
HIDs
wind deflectors
custom carbon fibre splitter
milltek manifold powerflow cat back
tints
custom focus rs bonnet vents

Top
#467755 - 25/09/12 06:14 PM Re: remap for mil light? [Re: owningmilo07]
owningmilo07 Offline
Site Supporter

Registered: 29/05/10
Posts: 940
Loc: Somerset
edit!!!
p0136 and p0138 =]
plus found this
http://www.fordfiestast.co.uk/showflat.php?Number=153855
do i need to just wait??
_________________________
done
all aero wipers
dmb badges
lenso d1r's matt black
eibach 35mm springs
HIDs
wind deflectors
custom carbon fibre splitter
milltek manifold powerflow cat back
tints
custom focus rs bonnet vents

Top
#467756 - 25/09/12 08:01 PM Re: remap for mil light? [Re: kinobeSTew]
Jack_P Offline
Dirtiest Car 2013 + 2014

Registered: 21/07/10
Posts: 6012
Loc: Northants
Quote:

The latter is me, hehe. Found any decent elbow ones? I would quite like a stainless one so it doesn't corrode and get stuck.




get some copper slip paste on the thread and it wont seize in there, stainless is the better shout!
_________________________
180Bhp/206Nm



Top
Page 2 of 2 < 1 2

Moderator:  Duncan_P, kenny, Kev 
Search

Who's Online
0 registered (), 1471 Guests and 0 Spiders online.
Key: Admin, Global Mod, Mod
Shout Box

Featured Member


Registered: 01/01/70
Posts:
Today's Birthdays
No Birthdays
Newest Members
ajapugi, yxubaxu, Fabio, Cymroboi, kingsavo
8586 Registered Users
Top Posters (30 Days)
ChrisCumbria 5
Fabio 1
d1azPT 1
Top Posters
ROB IS THE STIG 50824
ChrisCumbria 23756
Scotty 18100
Adam08 15118
Alex_H 15061
kenny 11806
YellowBadge 11633
steviehouse 11614
babyboom 11557
Micky 11552
Forum Stats
8587 Members
50 Forums
32274 Topics
561349 Posts

Max Online: 5881 @ 31/12/19 02:16 AM