Hi all,

Changing the rear brake light I got a bit trigger happy removing internal trim to get at the inside of the light housing (it would not come off after undoing the two bolts and felt like I was going to snap something)

In this process I removed the plastic trim that holds the parcel shelf in place.
This bit of plastic hooks over the seat post and the seat belt slots into the backpart.
Problem is I cannnot get it back into place, it is supposed to slide under the trim underneath the window by about 1-2cm. however I cannot get it to slot back in. consequently the 3 screws and the plastic fitting parts are around 2 cm out, as i cant get the plastic further in toward the car.

I am considering removing the whole panel under the window. If I need to do that a guide would be helpful, I am trying not to snap anything!

Thanks in advance,

also apologies if this is not clear was tricky to explain, will take some pics when it is light!

Cheers

AL

Ive had this off in my car from what i remember mine went back without any hard work, i will take mine off 2moz and give u an update if you dont get it done