The other site is fiestastoc.com
The fittings you need are all AN6, 10mm fuel hose for the evap and 8mm heater or silicone hose for the servo (would have used fuel hose but it was too stiff). I used 45 degree barbed fittings for neater routing.
Yes, the PCV and valve cover are the same, 16mm ID.
The vibra technics mount still allows quite a bit of movement if you get the road version. The race version probably a lot less so but then there will be too much nvh.
_________________________
2005 Fiesta ST - wrote off
Newman fast road cams, Fusion Fabrications custom inlet manifold, custom exhaust
Site Supporter
Previous Topic
Index
